No matter what we are doing, if we have mastered some working skills, we will save a lot of time and trouble in actual operation. For example, the production of carbide end mill bits is the same. If you understand its production skills, you can not only improve the quality of the carbide end mill bits, but also speed up the production speed. Next, let's learn about the production skills of carbide end mill bits.
The milling cutter made of tungsten steel utilizes the unique hardness of tungsten steel to a certain extent. It is a relatively hard alloy metal. For tungsten steel milling cutters, its appearance is similar to some cantilevers. For milling cutters, it The position is connected with the spring. In the processing of milling cutters, the more troublesome degree is the processing of the mold.
Because the hardness of tungsten steel alloy is relatively high, the requirements for cutting are more cautious, especially if the strong pressure is too large, it will cause the occurrence of cracking. Therefore, in order to avoid the scrapping of the mold, the milling cutter is made The first step of the mold is to use manual mechanical friction to do water-soluble cutting. At the same time, for the cutting of the shape of the tool holder, it is necessary to use the close cooperation of the tool holder and the tool holder to tightly specify by the way of buckle. In this way, it can be ensured that there is a handle in the process of processing the milling cutter, so that the milling cutter will not fall off due to lack of support during the manufacturing process.
The other is to make an oil film on the shape of the carbide end mill bits. This is a meticulous process. Because tungsten steel has better wear resistance, but because the carbide end mill bits have more inner holes, they cannot be polished by friction. The only way to achieve a clean appearance is to use the oil film. Regarding the size of the diameter of the tungsten steel milling cutter, to a certain extent, it depends on the machine and the scale of customization. Generally, each batch of carbide end mill bits produced has a certain model size of milling cutter.





