Vertical Milling Machine 1165 CNC equipment is a logically complex machine. Improper use or illegal operation may cause damage to equipment and personnel. This article is used as a guide,
This book describes the various functions of the vertical machining center equipment, some of which are optional configuration, not all equipment has it, only as a learning reference.
1. The use of vertical machining center equipment
The VMC series vertical machining center is a vertical machining center controlled by CNC (computer numerical control device) and performing cutting processing. It can perform drilling, tapping and milling; it can solve the processing of complex, precise, small batch, and multi-variety parts. The problem is that drilling, tapping, and milling can all be completed in one clamping on a vertical machining center.
Machining center precision machining
The CNC vertical machining center equipment introduced in this article is a comprehensive processing machine for metal cutting. Please do not use this vertical machining center for other purposes than the original settings. If there are any problems in use, please contact the equipment. Contact the production company.
2. Safety instructions for the operation of vertical machining center machine tools
Good lighting conditions should be maintained around the machine tool, and the environment should be tidy and have enough space. Check the current and intact state of the equipment, check the cutting tools and spare tools, and check the reliability of the tool fixation on the machine spindle, check the accurate position of the travel switch and limit switch (check the correct position of the tool on the tool magazine).
When abnormal conditions occur in the pneumatic and lubrication systems, the power supply should be cut off immediately to terminate the work of the machine tool. Before starting the machine tool, check the safety protection device of each part, and whether each moving part is unblocked within the stroke range.
Safe operation of machining center
According to the alarm prompts of the system (such as "coolant level is too low", "lubrication level is too low", "lubrication pressure is insufficient", etc.), clean the components as required, add coolant, lubricating oil, etc. correctly (pay attention to the coolant and lubrication The type of oil can be selected by consulting the equipment manufacturer).
The filter screen of the cold heat exchanger of the electrical cabinet (or air conditioner and other refrigeration devices) is required to be cleaned once a week, and the cleaning cycle can also be shortened according to the site conditions.
(1) The vertical machining center is suitable for complex, precise, small batch, and multi-variety parts processing. ()
(2) When there is an abnormal situation in the pneumatic and lubrication system, the power supply should be cut off immediately to terminate the work of the vertical machining center. ()
(3) Safety protection device, each moving part does not run smoothly within the range of travel, and does not affect the operation of the equipment, and the equipment can be started. ()
