CNC horizontal slant bed lathes with milling fucntion is a very precise production tool. Compared with Conventional lathes, CNC horizontal slant bed lathes has advantages in accuracy, efficiency and pass rate, which can greatly improve product quality and production efficiency.
One, accuracy advantage.
Ordinary lathe: Driven by gears and ordinary nuts. Due to the gap between the motion pairs, manual operation is inaccurate and the repeat accuracy is low. Ordinary lathes need to be manually measured after stopping, and the measurement error is large.
Turning and milling compound machine tool: the drive motor drives the ball screw drive. After the ball screw is pre-tensioned, there is interference, and there is no backlash in the transmission. The accuracy is mainly guaranteed by the machine tool itself and the program. The position can be measured by the encoder during the machining process, which can compensate the error caused by tool wear and other reasons. Therefore, the processing quality is good and the precision is stable.
Second, the advantage of mass production efficiency: high-speed precision horizontal inclined rail lathe.
Ordinary lathe: requires skilled operators. As the manual three-jaw chuck is used, it must be stopped and then manually measured during measurement, which results in low processing efficiency.
Turning and milling compound machine tools: Under the premise of mass production, using hydraulic chucks or collet chucks to clamp the workpiece, workers who do not understand any technology can operate at least two CNC lathes at the same time. The production efficiency is more than 4 times that of ordinary lathes.
Third, the pass rate advantage.
General lathe: Due to manual operation, human influence is great. Once the operator's physical condition is poor or the mind is not concentrated, the product reject rate will rise sharply.
Precision CNC lathe: Machining accuracy is basically guaranteed by equipment. The operator only plays the role of loading and unloading workpieces and switches, with little human influence, so the product qualification rate is relatively high.
Fourth, the advantages of labor resources.
Ordinary lathes require skilled operators. Any adult can operate a precision CNC lathe.
Precision CNC lathes are the mainstream equipment of contemporary machinery manufacturing and are popular commodities in the market. As the requirements for equipment in my country's manufacturing industry are getting higher and higher, science and technology continue to advance, my country's ability to design and produce CNC lathes is also constantly improving, and precision CNC lathes have made great progress in technology, precision, and efficiency.
