The machine center v850 is a mechanical equipment that integrates electricity, oil and gas. The price is high and the electronic components are complex. The service life of a machining center is inseparable from the maintenance work of the operator. The machining center is usually placed in the workshop, what should I do if water enters it accidentally?
1. Cut off the power supply to prevent electric shock and prevent the fault from expanding.
2. Remove all electrical equipment that has been immersed in water.
3. If the components are immersed in turbid water, they should be disassembled and rinsed with clean water.
4. Drain the water on the components and parts.
5. Put the damp components and parts in an oven for drying (with a temperature-controlled oven). If you do not have an oven, you need to expose the damp parts and components to the sun for several days, and the time is subject to drying.
6. Reassemble the removed parts.
7. Power on the parts and components after baking one by one to check their integrity.
8. Professionals will install the inspected parts and components back to the machine tool.
9. Startup, joint debugging, sports car, and normal use.
The processing center should be placed in a stable and dry place. In recent days, the weather has been hot. If the processing center is exposed to water due to a sudden rainstorm, the above methods can be used for emergency treatment.
