What are the safety items for vertical machining centers? The technical content of the vertical machining center is relatively high, so the operating procedures are complicated. During the operation, the operation procedures must be strictly followed to ensure the normal operation of the vertical machining center. In order to ensure the normal operation of the vertical machining center, what should we pay attention to when using the vertical machining center.
1. After starting up, check that the switches, buttons and keys are normal and flexible, if the vertical machining center is abnormal.
2. Do not wear gloves to touch rotating mechanical parts. It is best not to wear gloves to operate the switches and buttons on the panel. You cannot touch the switches and buttons on the operation panel with wet hands.
3. Check whether the voltage, oil pressure and air pressure are normal. Manual lubrication requires manual lubrication.
4. Carry out daily maintenance every day. Check the transmission log before working. Before starting the vertical machining center, check whether the regulated power supply is in the state of automatic voltage regulation.
5. When clamping the workpiece, pay attention to whether the pressure plate pin in the direction of the workpiece obstructs the movement of the tool, check the white part and the abnormal size (if high point). When using a press to process a workpiece, please pay attention to whether the tool mills the jaws, etc.
6. Correctly measure and calculate the coordinate system of the part, and verify and verify the result.
7. It is necessary to verify whether the tools in the program are consistent with the tools in the processing table to avoid wrong tools. Check whether the shape and size of the front and rear shafts meet the requirements of the machining process, and if you can hit the workpiece and fixture.
8. For test and single-level test cutting, the fast override switch must be placed in a lower position.
